Principals


Alchemia SA group - Poland



Steel production is the group’s core business. Operating activities are concentrated in subsidiaries. The parent company focuses on commerce.

HUTA BATORY produces high quality seamless steel pipes from a wide range of steel grades, including carbon steel, alloy steel and heat resisting steel, provides a wide range of products: line pipes, construction pipes, shipbuilding pipes, boiler tubes and construction pipes for machining. Those are used mostly in the power, petrochemical and drilling industry, and in building gas and oil pipelines.

RUREXPOL is a manufacturer of specialist pipes of basic diameters 121-298 mm used mainly for carrying and exploiting crude oil and gas. To meet the needs of power industry, Rurexpol produces alloy and structural tubes, which are machined at later stages to make elements of hydraulic servo-motors and load-bearing structures.

WALCOWNIA RUR ANDRZEJ (WRA) manufactures hot-rolled seamless pipes of small diameters (21.3 mm to 114.3 mm) and 2.0 to 10 mm in thickness. The laboratories of the pipe mill make chemical analyses of steel and cast iron, as well as carry out metallographic examinations, and technological and mechanical tests.

HUTA BANKOWA is a renowned producer of square billets, square bars for pipe production, square bars for gas cylinder production, round bars, angles, bulb flats, railway and tramway wheel tyres as well as rolled rings.

KUŹNIA BATORY offers forged products such as bars and forgings. Steel forged products after further processing are used in the machine-building, shipbuilding and electricity industry. They are a further processing stage for the products offered by steel mills.

Additionally, Laboratoria Badań Batory offer services of preparing samples for studies and for heat treatment, as we as metal-science studies, non-destructive tests, mechanical property studies, strength testing and chemical composition studies.

Quam SRL - Italy


BEST PERFORMANCE
High Quality Products are the minimum requirement to optimize plant performances and help to reach plant operational targets.

LONG LIFE SERVICE
Oil & Gas field require an unsurpassed product reliability to maintain high level of plant production by extending plant performances while decreasing operational and life-cycle costs.

TAILORED SOLUTIONS
Oil & Gas field needs field proven products tailored specifically for each very demanding applications, improving plant production while reducing hazardous emission & noise and increasing the employee safety.

Customer Satisfaction is the QUAM main strategic target.
QUAM support their Customer for any needs, from their budgeting processes through engineering development, quick deliveries, state of the art manufacturing and reliable after sales service.

PRODUCTS ARE:
Generally are Choke, Gates, Wellhead Control Panel, Control System, Liquid Discharge and more..


ADVANCED ACTUATORS LIMITED


Advanced Actuators Limited (AAL) design and manufacture a wide range of electro-hydraulic actuators used for valve control in the oil & gas sector.

The range includes both linear and rotary actuators which can be supplied in a number of formats these being.

- lsolating or modulating.
- Fail last or spring to close/open.
- Weatherproof, Eexd or l.S.
- Self-contained or ring main type.


SUD ROBINETTERIE Industrie


SRi was founded in 1978 and is situated on a 12000 m² site with the most modern facilities to design, manufacture, test and equip high quality ball valves for industrial applications....

In 1990 SRI decided to expand into the manufacturing of trunnion and floating ball isolation valves to its own proprietary custom designs. These designs are based on its experience in servicing the oil and gas, and refining industries.


SANCO




Founded in 1988, SANCO S.p.A. is an Italian manufacturing Company involved in the International Market that designs and supplies a complete range of fire & gas detection and fire suppression equipment/systems, as well as associated services and fire fighting vehicles.

SANCO S.p.A.is working to offer expertise and products which realize safe, reliable and competitive-priced systems by using materials and technologies which grant environmental integrity.

SANCO S.p.A. seeks the highest standard of performance by means of continuous investment in Research and Development. Innovation is presently the turn-key which drives SANCO to help its customers to meet their needs of fire protection for tomorrow.


ATG UV




With 35 years of passion and expertise in water treatment, ATG UV is the world leader in the design and manufacture of environmentally friendly and chemical-free UV disinfection systems and water treatment packages.

Serving an international customer base through an established distributor network, ATG UV operates from a modern, purpose built manufacturing facility in the North of England.

Equipped with a specialist in-house technical design team and skilled engineers, ATG UV is able to provide effective, cost-efficient and bespoke solutions for a vast range of industry needs.

The ATG UV team are committed to maintaining the high standards expected from a world market leader. With award-winning technology, experience and focus on customer care, ATG UV has earned an international reputation for quality, innovation, and design.


DELLA FOGLIA


The company was founded in 1962 by Mr Guido Della Foglia as a small artisan company producing ball and needle valves for the domestic market only. During the last 54 years the company has acquired considerable experience, product knowledge and a high degree of specializations, which have enabled us to be considered in the international market, supplying our products to oil and gas petrochemical power generation and water industries.

Della Foglia produces ball valves: all types, ratings, sizes, serving the main market segments, like: On-Shore & Off-Shore Oil and Gas Storage and Pipelines; Gas Treatment and Re-Injection Plants; Oil and Gas Gathering Systems; Water and Steam Injection Plants; LPG and LNG Plants; Petrochemical and Refining Industries.


ENERPROJECT




A world-renowned compressor packager for any kind of applications with more than 20 YEARS of experience.

Their international presence and activity are supported by a strategic network of branches and agents around the world.

Their mission is to offer customers, products in line with the traditional Swiss precision, providing the latest engineering solutions at outstanding quality.

Incorporated in 1995, Enerproject is a world renowned company and internationally present and active through its network of strategically located offices and contacts around the world.

They manufacture a comprehensive range of gas compressor packages to serve some of the main fields and subsequent applications. PG, O&G, refrigeration and renewable Energy.

All package systems are based on well proven heavy duty machines.

They meet the gas compression requirements of the main fields of application which include but are not limited to:



Through those sectors and more, the excellence and dependability of Enerproject’s gas compressor packages enjoy experience, customer satisfaction, flexibility, availability and uncompromised quality.

They focus to offer maximum flexibility to meet their customers needs and to provide the best operating reliability and (technical) assistance over the years.


MEFASA


Mecanizaciones y Fabricaciones. S.A.U. (MEFASA) established in 1965 is a Capital Goods manufacturer with wide capacities and references in several industrial sectors: Iron and Steel, Pulp and Paper, Chemical and Petrochemical, Energy, Milling, Mining, etc.

MEFASA is a private company, a 100% wholly owned by ASTURIANA DE ZINC, S.A., that is one of the largest world's electrolytic Zinc maker.

MEFASA is located in San Juan de Nieva (Aviles-Asturias) at 10 Km. away from the airport of Asturias, and 100 m. from the commercial seaport with its own dock and direct access to the Bay of Avilés, what allows to carry out a FOB delivery and, in special cases, to manufacture equipments without dimensions limitations to be loaded.

The Company's general activity is the manufacturing and delivery of mechanic-welded equipment (in case of metallic materials) or those made of plastics and composites materials, in accordance with manufacturing drawings provided by the customer or developed by our teamwork.

Their scope of supply can be completed with assembly/disassembly works, commissioning and Start-Up activities that conforms the "turn key" projects.

In addition we have the technology for the manufacturing of equipment or components using sandwich structures and foam cores of PVC, PU, Nomex, etc.

At present, MEFASA comprises two Divisions: Metallic and Plastic.